Parts for Weber Genesis 4000 Gas Grills
Gas Grill Parts from Grill Parts Distributors.


WEBER GENESIS GRILLS.  Weber designed one of the most popular and innovative gas grills over 20 years ago - the Weber Genesis with a three burner system, short and long flavorizer bars, and pull-out drip pan.  We stock and sell cook grids, flavor bars, burner tubes, crossover tubes, igniter kits, warming racks and most other parts for the Weber Genesis series.

One Low Shipping Charge Per Order - Only $9.89 Per Order


For Weber gas grills, we DO NOT stock or sell:

 

Cart Parts
Conversion Kits
  Covers
Hoses
  Manifolds
Orifices
  Regulators
Rotisseries
  Shelves
Valves
Parts Popular Parts for Genesis 4000 Price
Cook Grid Set
P/N 9866
The 9866 porcelain cook grid set has been discontinued by Weber and is no longer available. We are out. Sorry, we don't stock or sell this part. Cooking Grids. Set of 2 porcelain-enameled grids for Genesis 4000, 5000 & 5500, and Platinum Series II 2200, 3200, & 3400 grills. The 9866 cook grid set contains a two grids of different sizes. This is because this series grill was sold with a steam and chip smoker box already installed. The larger grid in the set measures 11 3/4 by 17 1/4 inches and the smaller grid is 9 by 17 1/4 inches.
Cook Grids
P/N 9861
Sorry, we don't stock or sell this part.
Weber Genuine Factory Part.
Stainless Steel Cook Grids for the Genesis 4. Contains set of 2 exact-fit stainless steel cook grids (one large and one small). Made to fit Genesis 4, 5, 4000, 5000, & 5500. Also fits the Genesis Platinum-B & C and Platinum Series II, 2200, 3200, and 3400 grills. Will porcelain enameled set 9866. The larger grid in the set measures 11 3/4 by 17 1/4 inches and the smaller grid is 9 by 17 1/4 inches. (small 78930/ large 78929)
Choosing Weber Flavor Bar Sets.  We stocked and sold genuine Weber factory flavor bars for over 40 years.  As Weber prices increased, our customers looked for a quality stainless steel alternative, comparable flavor bar sets at affordable prices.  Recently, we have seen low quality alternatives offered on the web.  So, we decided to offer our customers a quality stainless steel flavor bar set.  Below we offer a stainless steel flavor bar set, much like Weber.
After Market Stainless Weber Flavor Bar Set
P/N WFB
in-stock
While Supplies Last. The Weber Genesis Series from the late 1990s through the early 2000s was one of Weber's most popular entries into the gas grill market. It featured a crosshatch of 13 flavor bars (8 short bars and 5 long bars). Over the last 30 years, Weber has sold OEM sets of these stainless steel flavor bars under three different part numbers - 9814, 7538, and now 65901. Parr numbers 9814 and 7538 are discontinued by Weber. We don't sell the Weber 65901 set - but you can find them on the internet - usually priced between 130.00 and 149.00. In response to customers looking for a quality, all stainless steel replacement flavor bar set for early Genesis models at more affordable price, we now provide an alternative to Weber factory equipment. This stainless steel set includes 13 flavor bars: 8 short bars measuring 15 7/8 inches each and 5 long bars measuring 23 3/8 inches each. Made for Genesis 1000, 1500, 2000, 3000, 3500, 4000, 5000, 5500, and also Genesis 1, 2, 3, 4, 5. Most Genesis grills originally came with porcelain enameled flavor bars. This quality stainless steel set of 13 is an upgrade from porcelain enamel bars. $95.00
Per Set.
P/N WFB
[Order quantity of one and you receive one set of 13 stainless steel flavor bars]
Quantity of Sets:
Weber Genuine Stainless Steel Flavorizer Bars
P/N 9814
in-stock
Weber OEM Part Number 9814 was Weber's replacement set of stainless-steel flavor bars for the Genesis series. We stocked and sold them over 20 years ago. We recently found a small quantity of these Weber OEM Parts #9814 in our warehouse. After 20 years, the boxes were scruffy, dirty, and ripped apart beyond repair and use. We have repackaged these original Weber parts into new blank cardboard for protection and enclosed the remaining portion of the Weber four color box inside for verification of the part's origin.as Weber original parts. But the bars are perfectly intact and not damaged. We are selling the sets while they last. Stainless Steel Flavor Bar Set. Complete set of stainless steel flavor bars: 8 short (16 inches) and 5 long (23 3/8 inches) for Genesis 1000, 1500, 2000, 3000, 3500, 4000, 5000, 5500, also Genesis 1, 2, 3, 4, 5. Most Genesis grills originally came with porcelain enameled flavor bars. The long flavor bars are 23 3/8 inches long and the short flavor bars are 16 inches long. This 9814 set upgrades the flavor bars to stainless steel.
$99.00
per Set of 13 Genuine Weber OEM Flavorizer Bars.
Quantity of Sets:
Genuine Weber Porcelain Enameled Flavorizer Bar Set of 13
P/N 9813
in-stock
Weber Part Number 9813 was Weber's porcelain enameled set of 13 flavorizer bars. They discontinued this 9813 set quite a while ago to offer their stainless-steel sets (9814. 7538, 65901). We recently found a small quantity of these OEM 9813 sets in our warehouse. Unfortunately, the boxes are scruffy, dirty, and ripped apart beyond repair. (We have repackaged these OEM bars in new cardboard with the remaining portion of the original Weber four-color box that still exists. The bars are in perfect, usable condition) and we are offering these few sets at deeply discounted pricing. Porcelain enameled Flavor Bar Set. Complete set of 8 short (16 inches) and 5 long (23 3/8 inches) flavor bars for Genesis 1000, 1500, 2000, 3000, 3500, 4000, 5000, 5500, also Genesis 1, 2, 3, 4, 5. Most of the Genesis Series came with this porcelain enameled set. The long flavor bars are 23 3/8 inches long and the short flavor bars are 16 inches long. To upgrade to stainless steel flavor bar set, use 9814. $69.00
per set of 13 porcelain enameled Weber flavorizer bars. P/N 9813
Quantity of Sets:
Weber Genuine Stainless Steel 3 Burner Tube Set
P/N 20428
in-stock
Weber Genuine Factory Part. #20428 Genuine Gas Grill Stainless Steel Burner Tube Set, Contains 2 Front and Rear Burners that measure 29-1/4 inches, 1 Center burner measuring 28-1/2 inches, and 1 crossover tube Measuring 3/8inches in diameter by 13-3/8 inches. Fits Genesis 1000, 2000, 3000, 4000, 5000 Grills, Genesis 1000LX, 2000LX, 3000LX Grills, Genesis Gold Grills Before 2002, Genesis Platinum Grills Before 2002, Platinum I & Platinum II Grills. Replaces Weber Genuine Part Number 7506. $64.99
Set
Quantity of Sets:
Choosing Your Igniter Kit. We only stock and sell two igniter kits for Weber grills - kits used in early Weber gas grill models. Weber used two different kits for "earlier" Weber models: for the Genesis models made up to 2002 and then for the Silver A, B, and C models made from approximately 2002 to 2009. Both kits use and contain a push button igniter, stainless box to capture the spark and gas, and wires to connect the push button to the electrode and collector box. The Weber part number for these two kits is 7509 and 7510. We do not stock or sell any battery operated or electronic Weber Igniter kits.
Both kits had the same electrode, collector box and wires. No difference. Both had a push button igniter included. The only difference in the kits is the design of how the push button mounts on the control panel. In the Weber 7509 kit (for early Genesis models) the push button is threaded and a locking nut is included that holds it in place. The part number for our replacement kit that does this is BBQ-509. Later Genesis and Silver models used a push button that "pushes in" and is held in place by tabs - held in place by friction with tabs. It does not have threads on the push button. This is Weber's 7510 kit and our replacement kit is BBQ-510.Please use this information and our illustration to pick the correct kit for your grill.
Replacement Igniter Kit for Webers 7509 Igniter Kit
P/N BBQ-509
in-stock
This igniter kit includes a push button igniter with threads and locking nut, a gas catcher ignition chamber with electrode and the black wire and the white wire to connect the electrode and collector box to the push button. (11B) $14.49
Each
Quantity:
Replacement Igniter Kit for Webers 7510 Igniter Kit
P/N BBQ-510
in-stock
This igniter kit includes a push button igniter that pushes in and is held firmly in place by tabs on the side of the button, a gas catcher ignition chamber with electrode and the black wire and the white wire to connect the the electrode and collector box to the push button. (10B) $14.49
Each
Quantity:
Knob
P/N 40875590
(Sub to MCM 00120)
in-stock
To provide customers with a quality, look alike, and less expensive alternative to the Weber factory knob, we are now stocking and selling an exact fit, light grey, same stem length, aftermarket knob made specifically for this model of your Weber gas grill. It has been sold successfully for years on the Internet as a replacement for Weber factory knobs. Part number MCM 00120. Same stem length, light grey in color. To have all the knobs on the grill match, we suggest ordering as many knobs as you need. (MCM00120). $5.49
Each
Quantity:
Warm-up Basket
P/N 9875
in-stock
This Weber warm up basket is the cradle style warming basket that fits into the notches of the lid of the following Weber models: Genesis 1000, 2000, 3000, 4000, 5000, 5500 and the Weber Spirit 700. It measures 24 1/4 inches from tip to tip of the hanging rod. It is not the flat basket that sits across the cooking compartment on the bottom casting. (7514, 4872180)(APWEBCR) $18.75
Each
Quantity:
Genuine Weber Pull Out Tray
P/N 40968012
We will be doing an extensive warehouse inventory this fall for any stock we have of this pull-out Weber drip tray. We will update this listing with the results of our search on Thursday, December 1, 2022. Please check back. Thank you for your patience.
Pull out bottom tray under burner section. 13 13/16 by 19 5/8 inches. Does not come with catch pan holder (#85915) or catch pan (#40822203).
Set of 2 Rails and 4 Mounting Screws
P/N 40822205
in-stock
By ordering this part number, you will get set of two rails plus the needed four screws to mount the rails. (97783) $18.50
Per Set
( 2 Rails and 4 Mounting Screws )
Quantity of Sets:
Aftermarket Replacement for Weber 7515 Aluminum Gas Grill Catch Pan and Holder
P/N AM-7515
in-stock
Our Aftermarket Replacement for Weber 7515 is a high-quality replacement Gas Grill Aluminum Catch Pan and Holder Bracket. Designed to fit under the Pull Out Drip Trays for Weber Genesis Models 1000-5500, Genesis Silver B/C models. Measurements are 9.1 inches by 7.3 inches and 3 inches deep. Does not include aluminum catch pan liners. You can order the disposable pan inserts from our website using P/N 3300. $21.99
Set
Quantity of Sets:
Drip Pans
P/N 3300
in-stock
Weber Genuine Factory Part. Small Drip Pans. These drip pans are used in the Weber Genesis, Silver, and Spirit Series Grills to line the enamel catch pan in the pull out bottom tray. Each pan is 6 inches by 8 1/2 inches. 10 per package. Does not fit the Summit Series grills. (3300, 6415) $5.49
Pack of 10
Quantity of Sets:
Wheel - 8 inch Diameter with Hub Cap
P/N 4082850
New P/N 99252
Sorry, we do not stock or sell this part. Weber cart wheel. Weber now subs old wheel, 4082850, to a newly designed cart wheel for Genesis, Spirit, and Silver Series grills. The new wheel has the same dimensions as old part number 4082850, takes the same axle rod, takes the same push on black hub cap, and is still 8 inches in diameter. The difference is it is more modern, contemporary, or fancy in appearance. If you have the old wheel and want the wheels to match, order quantity two (2). Each wheel is shipped with one Weber hub cap (P/N 87101) at no additional charge. Sorry, we do not have extra Weber hub caps to sell separately.
Genuine Weber Grill Cleaning Brush
P/N 6464
in-stock
Reduced pricing on overstock of our Weber Genuine Grill Brush. Recently found in our warehouse inventory. This Genuine Weber Grill Cleaning Brush has an 18-inch-long bamboo hardwood handle with a leather strap for hanging brush on tool holder or utensil hooks. And notched scraper on the end to remove stubborn materials. (6422, 6464, 1647) [WHD]. $10.00
Each
Quantity:
Covers for Weber Grills
Sorry, we do not stock or sell any covers for Weber grills. Try Weber Customer Service.
Covers for Weber Grills
Manifold Assemblies, Valves, Orifices
Sorry, we do not stock or sell any manifold assemblies, valves, orifices, regulators, hose and regulator assemblies or conversion kits for any Weber gas grill.
Manifold Assemblies, Valves, Orifices
Other Weber Parts
All the parts we stock and sell for Weber grills are listed on our website. We do not stock or sell any other Weber parts. If you don't see the part on our website, please try Weber Customer Service.
Other Weber Parts

 

 

Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.
 

Answers and Click Throughs to Frequently Asked Questions

What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. The parts carry a one year warranty.  We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  Because of our low prices, and low shipping charge per order, we reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com.  Please use our online brand shopping carts for efficient order processing.  To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out.  If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.  Sorry, we do not accept PayPal.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  There is one low, flat rate shipping charge per order - $9.89 per order.  We only ship to the lower 48 United States and only via UPS ground service.  We need a street address for the shipping address.  No PO Boxes.  Sorry, we are unable to combine orders nor can we add to orders after the shopping cart is charged and closed out.  We have no local pick up.  We usually ship within two business days of the receipt of order.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store and do not offer customer pickup at our warehouse.
Shipment Inquiry
& Report Form
  Customer
Inquiry Form
  Shipping and
Processing Times
  Returns
Policy
  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 

Back to the Home Page


Copyright 1997-2022, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.