One Low Shipping Charge Per Order - Only $9.89 Per Order

For Weber gas grills, we DO NOT stock or sell:   • Cart Parts • Conversion Kits   • Covers • Hoses   • Manifolds • Orifices   • Regulators • Rotisseries   • Shelves • Valves
Parts	Popular Parts & Accessories for Silver B Parts	Price
Choosing Weber Cook Grids.  We stocked and sold genuine Weber factory cook grids for over 40 years.  As Weber prices increased, our customers looked for quality replacement cook grids at more affordable prices.  Recently, there has been a range of lesser quality alternatives on the web.  We decided to offer our customers high quality alternatives to Weber Factory Cook Grids.  Below we offer a replica stainless steel stamped grid set, much like Weber.  We also offer a solid, stainless steel rod set.  Both are listed below.
Aftermarket Stainless Steel Cook Grid Set For Weber P/N 7527-AM	Sorry, we are temporarily out of stock of this part until next season - January 17, 2024. Please check back. This aftermarket stainless steel cook grid set is made as a exact fit replacement for Weber original equipment set part number 7527. This replacement cook grid set is made of high quality 304 stainless steel. The 7527-AM set can also be used as replacement for Webers porcelain cook grid set part number 7525. This set of 2 stainless steel cook grids is made to fit models Silver B and C, Genesis 1000, 1500, 2000, 3000, 3500, and also Genesis 1, 2, and 3 and Gold B and C. The individual cook grids in this set measure 11 3/4 inches by 17 1/4 inches to combine for an overall size of 23 5/8 by 17 1/4 inches. (CG85SS Large Set)
Stainless Steel Rod Cook Grid Set. Set of 2. Made in USA. P/N CG48SS in-stock	Made in USA. This new, replacement cook grid set is made of high quality 5/16 inch thick. 304 stainless steel rods. Set of 2. Each cook grid weighs 6.7 lbs for a combined set weight of 13.4 lbs. In response to customers looking for a durable, sturdy alternative stainless steel rod cook grid for their Weber Genesis and Silver B and Silver C series gas grills, we now provide this alternative to factory equipment. This cook set is made of the same high quality 5/16 inch stainless rod that we use in our Viking and Dynamic Cooking System cook grids. This set is NOT ordinary steel rods coated or sleeved with stainless steel like many offerings on the web. This stainless steel rod cook grid set is 5/16 inch in diameter and is solid stainless steel all the way through. Each cook grid has 16 stainless steel rods, approximately 1/2 inch apart. This set is designed to replace Weber cook grid sets 7527, 7525, 9860, and 9869. Each individual cooking grid measures 17 1/4 inches by 11 3/4 inches and combine for an overall size of 17 1/4 by 23 5/8 inches. (CG48SS/large set)	$128.00 Set of 2 Quantity of Sets:
Choosing Weber Flavor Bar Sets.  We stocked and sold genuine Weber factory flavor bars for over 40 years.  As Weber prices increased, our customers looked for a quality stainless steel alternative, comparable flavor bar sets at affordable prices.  Recently, we have seen low quality alternatives offered on the web.  So, we decided to offer our customers a quality stainless steel flavor bar set.  Below we offer a stainless steel flavor bar set, much like Weber.
WFB-5M. Stainless Steel Flavor Bar Set. Made in the USA. P/N WFB-5M in-stock	Made in the USA. This flavor bar set is an aftermarket stainless steel flavor bar set produced to replace Weber stainless set 7537 and Weber porcelain enamel set 7536. These sets are used in the Weber Silver B and Silver C models. In response to customers looking for a quality, all stainless steel replacement flavor bar set at an affordable price, we now provide an alternative to Weber factory equipment. This stainless steel flavor bar set(5 bars) includes five bars that are 22 9/16 inches long. This flavor bar set is made of high quality 304 stainless steel and has a 18 gauge thickness. The lower the gauge number...the thicker the bar. This set is thicker than the 20 gauge flavor bars we see sold on the Internet. This quality stainless steel set is an upgrade from porcelain enamel bars. (5FB-M) (WFB5M)	$59.99 Per Set [Order quantity of one and you receive one set of 5 stainless steel flavor bars 22 9/16 inches long] Quantity of Sets:
Flavorizer Bars P/N 7536	Sorry, we do not stock or sell this part. Gas Barbecue Flavorizer Bars, porcelain enamel (5 Bars) for Spirit 700, Weber 900, Silver-B and Silver-C. Each of the five flavor bars in this set is 22 5/8 inches long. (Formerly 9817 and 9812)
Flavorizer Bars P/N 7537 in-stock	Limited availability. Found boxed sets of Weber OEM 7537 bars in original packaging in our warehouse. Closeout pricing while they last. Stainless Steel Flavor Bar Set (5 bars) for the Spirit 700, Weber 900 and the new Genesis Silver B & C grills. Each of the five flavor bars in this set is 22 5/8 inches long. This is an upgrade to the porcelain set 9817. (9816)	$64.99 Set of 5 Quantity of Sets:
Genuine Weber Factory Burner Kit P/N 3611 in-stock	Limited Supply. Genuine Weber Factory Burner Kit. Fits Spirit 700, Silver B & C and Weber 900. Also, Gold and Platinum 2002 models to current. This factory kit includes 28-inch front and rear burners, a 27 1/4-inch center burner and a 12 3/4-inch crossover burner. Features built-in wire screen for venturis and spider guards. Hardware included.	$62.99 Set Quantity of Sets:
Choosing Your Igniter Kit. We only stock and sell two igniter kits for Weber grills - kits used in early Weber gas grill models. Weber used two different kits for "earlier" Weber models: for the Genesis models made up to 2002 and then for the Silver A, B, and C models made from approximately 2002 to 2009. Both kits use and contain a push button igniter, stainless box to capture the spark and gas, and wires to connect the push button to the electrode and collector box. The Weber part number for these two kits is 7509 and 7510. We do not stock or sell any battery operated or electronic Weber Igniter kits. Both kits had the same electrode, collector box and wires. No difference. Both had a push button igniter included. The only difference in the kits is the design of how the push button mounts on the control panel. In the Weber 7509 kit (for early Genesis models) the push button is threaded and a locking nut is included that holds it in place. The part number for our replacement kit that does this is BBQ-509. Later Genesis and Silver models used a push button that "pushes in" and is held in place by tabs - held in place by friction with tabs. It does not have threads on the push button. This is Weber's 7510 kit and our replacement kit is BBQ-510.Please use this information and our illustration to pick the correct kit for your grill.
Replacement Igniter Kit for Webers 7509 Igniter Kit P/N BBQ-509 in-stock	This igniter kit includes a push button igniter with threads and locking nut, a gas catcher ignition chamber with electrode and the black wire and the white wire to connect the electrode and collector box to the push button. (UP11B)	$15.89 Each Quantity:
Replacement Igniter Kit for Webers 7510 Igniter Kit P/N BBQ-510 in-stock	This igniter kit includes a push button igniter that pushes in and is held firmly in place by tabs on the side of the button, a gas catcher ignition chamber with electrode and the black wire and the white wire to connect the the electrode and collector box to the push button. (UP10B)	$15.89 Each Quantity:
Knob P/N 78960 (Sub to MCM 00120) in-stock	To provide customers with a quality, look alike, and less expensive alternative to the Weber factory knob, we are now stocking and selling an exact fit, light grey, same stem length, aftermarket knob made specifically for this model of your Weber gas grill. It has been sold successfully for years on the Internet as a replacement for Weber factory knobs. Part number MCM 00120. Same stem length, light grey in color. To have all the knobs on the grill match, we suggest ordering as many knobs as you need. (MCM00120).	$7.49 Each Quantity:
Warming Rack 4072122 P/N APWEB in-stock	Limited Supply. Found in our warehouse - aftermarket exact-fit Weber warming rack. Slightly tarnished with dull finish. Reduced pricing. Flat Chrome Plated Warm Rack. Sits across the back of the cooking surface in notches in the grill body. (7513, APWEB)	$16.00 Each Quantity:
Warm Up Baskets for Silver B and C Models. The Warm Up Basket is a Cradle Style warm up basket that fits in the notches of the upper lid of the grill. We have learned from Weber that different model years of the Silver B and C models use two different baskets. Below we have listed the baskets and have to choose correctly, according to guidelines give us by Weber.
Warm-up Basket P/N 9875SB1 in-stock	Warm Up Basket, our part number 9875SB1, was used in Silver B and C models made in model years 2000 to 2003. The easiest way to determine your model year is by the placement of the thermometer in the lid. If the thermometer is on the right side end cap of the lid, then the Silver B/C was made from 2000 to 2003 and you would order this warm up basket, 9875SB1. 9875SB1 measures 24 1/4 inches from tip to tip of the hanging rod. (3633, 9514). If not, read the next selection.(APWEBCR)	$21.00 Each Quantity:
Warm-up Basket P/N 9875SB2 in-stock	Closeout Pricing for this Overstocked Warming Rack. Warm Up Basket 9875SB2 was used in Silver B and C models made in the years from 2004 to 2006. The easiest way to determine your model year is by the placement of the thermometer in the lid. If the thermometer of your Silver B/C is in the center of the lid, then your Silver B/C was made from 2004 to 2006 and you would order this warm basket, 9875SB2. 9875SB2 measures 24 3/4 inches from tip to tip of the hanging rod (1/2 inch longer than 9875SB1). (APWEBCR1/87344).	$10.00 Each Quantity:
Set of 2 Stainless Steel Rails and 4 Mounting Screws P/N 98057-SS in-stock	By ordering our part 98057-SS, you will receive set of two stainless steel mounting rails plus the needed 4 mounting screws to mount the rails.	$24.00 Per Set ( 2 Stainless Rails and 4 Mounting Screws ) Quantity of Sets:
Tray P/N 90429 in-stock	This Weber OEM porcelain coated pull out tray has been discontinued by Weber. Very hard to find. In our recent warehouse inventory. we found a limited stock that have been in our warehouse for about 15 years. They are structurally sound, not bent, some have scratches and porcelain bare spots on edges. Please don't order if you won't be happy. Special reduced pricing. Pull out bottom tray under burner section. 11 11/16 by 17 7/8 inches. Does not come with catch pan holder (#85915) or catch pan (#93305).	$50.00 Each Quantity:
Aftermarket Replacement for Weber 7515 Aluminum Gas Grill Catch Pan and Holder P/N AM-7515 in-stock	Our Aftermarket Replacement for Weber 7515 is a high-quality replacement Gas Grill Aluminum Catch Pan and Holder Bracket. Designed to fit under the Pull Out Drip Trays for Weber Genesis Models 1000-5500, Genesis Silver B/C models. Measurements are 9.1 inches by 7.3 inches and 3 inches deep. Does not include aluminum catch pan liners. You can order the disposable pan inserts from our website using P/N 3300.	$21.99 Set Quantity of Sets:
Genuine Weber Aluminum Grease Catch Pan P/N 93305 in-stock	By ordering here, you will receive the Genuine Weber aluminum grease catch pan with TWO foil liners. Part number 93305. The pan measures 8 and 5/8 inches long by 6 and 1/8 inches wide. The pan sits below the pull-out tray in the wire catch pan holder. The catch pan holder is NOT included. The 93305 grease catch pan is designed to hold disposable 6 inch by 8 1/2 foil pan liners. Two are included with your grease catch pan order. You can order a replacement pack of the liners by clicking P/N 6415. We advise verifying measurements with your existing pan. (85880, 40822203)	$16.29 Each Quantity:
Drip Pans P/N 3300 in-stock	Weber Genuine Factory Part. Small Drip Pans. These drip pans are used in the Weber Genesis, Silver, and Spirit Series Grills to line the enamel catch pan in the pull out bottom tray. Each pan is 6 inches by 8 1/2 inches. 10 per package. Does not fit the Summit Series grills. (3300, 6415)	$5.49 Pack of 10 Quantity of Sets:
Wheel - 8 inch Diameter with Hub Cap P/N 4082850 New P/N 99252	Sorry, we do not stock or sell this part. Weber cart wheel. Weber now subs old wheel, 4082850, to a newly designed cart wheel for Genesis, Spirit, and Silver Series grills. The new wheel has the same dimensions as old part number 4082850, takes the same axle rod, takes the same push on black hub cap, and is still 8 inches in diameter. The difference is it is more modern, contemporary, or fancy in appearance. If you have the old wheel and want the wheels to match, order quantity two (2). Each wheel is shipped with one Weber hub cap (P/N 87101) at no additional charge. Sorry, we do not have extra Weber hub caps to sell separately.
Genuine Weber Grill Cleaning Brush P/N 6464 in-stock	Reduced pricing on overstock of our Weber Genuine Grill Brush. Recently found in our warehouse inventory. This Genuine Weber Grill Cleaning Brush has an 18-inch-long bamboo hardwood handle with a leather strap for hanging brush on tool holder or utensil hooks. And notched scraper on the end to remove stubborn materials. (6422, 6464, 1647) [WHD].	$10.00 Each Quantity:
Covers for Weber Grills	Sorry, we do not stock or sell any covers for Weber grills. Try Weber Customer Service.	Covers for Weber Grills
Manifold Assemblies, Valves, Orifices	Sorry, we do not stock or sell any manifold assemblies, valves, orifices, regulators, hose and regulator assemblies or conversion kits for any Weber gas grill.	Manifold Assemblies, Valves, Orifices
Other Weber Parts	All the parts we stock and sell for Weber grills are listed on our website. We do not stock or sell any other Weber parts. If you don't see the part on our website, please try Weber Customer Service.	Other Weber Parts

Answers and Click Throughs to Frequently Asked Questions What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. The parts carry a one year warranty.  We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  Because of our low prices, and low shipping charge per order, we reserve the right to limit quantities ordered. How To Order:  All orders are placed through our website: bbqparts.com.  Please use our online brand shopping carts for efficient order processing.  To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out.  If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping. How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you. How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.  Sorry, we do not accept PayPal. Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service. How We Ship:  There is one low, flat rate shipping charge per order - $9.89 per order.  We only ship to the lower 48 United States and only via UPS ground service.  We need a street address for the shipping address.  No PO Boxes.  Sorry, we are unable to combine orders nor can we add to orders after the shopping cart is charged and closed out.  We have no local pick up.  We usually ship within two business days of the receipt of order. Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store and do not offer customer pickup at our warehouse. Shipment Inquiry & Report Form   Customer Inquiry Form   Shipping and Processing Times   Returns Policy   Privacy Policy To Send Order Inquiry, Click Here: Orders@bbqparts.com   Back to the Weber Page Back to the Home Page Copyright © 1997-2023, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.