Parts |
Grill Body #3 |
Price |
Burner Alternatives. There are burner choices for Grill Body #3 depending if the burner controls are on the post of the grill or are on the upfront control panel or shelf. POST control burners have two venturi tubes going straight down the post of the grill. UPFRONT control burners have two venturi tubes that curve to the front of the grill. After you determine POST or UPFRONT style, you will need to select either the Stainless Steel Bow Tie Burner or the Cast Iron Bow Tie Burner depending on your own preference. The next four entries describe the choices.
|
|
Sorry, we do not stock or sell this burner, Try broilmaster.com. Stainless Steel Bow Tie Burner For Dual Control Model. Two Curved Venturi Tubes go from Burner and curve upfront to control valves on front control panel. Comes with Burner, Twin Curved Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep. The DPP-5 fits models P3, DU, D3, U3, S3. (69)
|
|
|
Cast Iron Bow Tie Burner For Dual Control Model. Two Curved Venturi Tubes go from Burner and curve upfront to control valves on front control panel. Comes with Burner, Twin Curved Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. This cast iron bow tie replacement burner cannot be used in any Broilmaster models that originally had stainless steel burners. And cannot be used in models starting with D, P, S, or U.
|
$119.00 Each
|
|
The stainless steel bow-tie burner for post controls, DPP4, has been discontinued by Broilmaster. We are sold out and cannot supply. For a replacement burner, order the cast iron bow tie burner with straight venturi tubes in this parts list. Stainless Steel Bow Tie Burner for Dual Control Model with Two Straight Venturi tubes that go straight down from the burner to the Control Valves in the Post. Comes with Burner, Twin Straight Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep.
|
|
|
Cast Iron Bow Tie Burner For Dual Control Model. Two Straight Venturi Tubes go straight down from burner to Control Valves in Post. Comes with Burner, Twin Straight Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. This cast iron bow tie replacement burner cannot be used in any Broilmaster models that originally had stainless steel burners. And cannot be used in models starting with D, P, S, or U.
|
$99.00 Each
|
|
Closeout Pricing. While Quantities Last. We sold this replacement, heavy duty, galvanized steel, radiation shield, for over 20 years. This aftermarket, replacement radiation shield was made to fit the following Broilmaster grill bodies: 3, 4, 5, and 1000. We recently found a limited quantity in the corner of our warehouse. The shield measures 16 3/4 by 8 inches. The center hole is 5 1/2 inches in diameter. There is a lip around the center hole to stabilize the shield sitting on the bottom of the grill opening. The notch on the back of shield was to let the tube from the custom Broilmaster smoker box draw air from the outside. Most folks don't have those smoker boxes anymore.
|
$21.95 Each
|
|
Made in the USA. By ordering this high quality set, you will receive 3 stainless steel rod cook grids made expressly to fit the Broilmaster Grill Body 3. Fits the models G3, P3 and D3. By ordering one set, you will receive three stainless steel rod cook grids to fit the cooking compartment of one grill. The combined dimension of the three cook grids is 16 7/8 inch front to back and 25 and 1/8 inch across the front.
|
$99.00 Set of 3
|
|
Sorry, we do not stock or sell this cook grid set. This heavy duty, cast iron cook grid set is made for the Broilmaster grill body Series 3 Grills. Fits the models G3, P3, and D3. By ordering one set, you will receive three cast iron grids to fit the cooking compartment of one grill.
|
|
|
Sorry, we do not stock or sell these cook grids. Alternative set of porcelain coated wire cook grids - set of 3. Made for exact fit in the #3 size casting. They can be turned over to duplicate the adjustable height levels of the original cast iron grids.
|
|
|
Rock grate. Size is 13 1/2 by 23 5/8 inches.
|
$21.00 Each
|
|
While Supplies Last. These high quality ceramic briquettes are made in the U.S.A. and are the choice of many grill manufacturers. Ducane 'original' ceramic briquettes specially made for us by Ducane's original briquette manufacturer. We special offer them as our choice for replacement grill briquettes. 77 Briquettes. Our ceramic briquettes, popular for over fifteen years, are approximately two inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. We have just one shipping charge per order so you can add a bag for no additional shipping charge.
|
$53.70 for 77 briquettes
|
Warming Rack Alternatives. In different years, Grill Body 3 used two different style warming racks. Read the description below to make the correct choice.
|
|
Sorry, Broilmaster has discontinued this warming rack and we are sold out. We cannot supply have no substitutes. This is the warming rack used on older models of the #3 casting body size. The warm rack went across the back of the grill and set in notches in the grill casting. The warm rack did not move as the lid was opened. (5G/)0WH - 1009)
|
|
|
Rectangular Heat Indicator that Mounted in the front of the top casting with two mounting screws. Heat sensor fits through the small hole in top casting. (TG-2B)
|
$8.95 Each
|
|
While Supplies Last. This valve knob was used on post control models. Grills with dual control valves on the post and took two knobs. Grills with a single valve took one knob. Broilmaster has discontinued this knob and we substitute a replica universal knob that will work in its place. (k10)
|
$7.25 Each
|
Valves & Orifices |
Sorry, we do not sell any valves or orifices for Broilmaster grills. Also, for reasons of product liability and customer safety, we do not sell or offer any orifices or conversion kits to change grills from one gas to another. |
Do Not Stock or Sell |
Lid & Cart Handles |
Sorry, we do not stock or sell any of the replacement plastic, wood, or metal handles for Broilmaster gas grills. |
Do Not Stock or Sell |
Other Parts |
Sorry, we don't sell valves, igniters, cart parts, wheels, pedestal or cart base kits, no top or bottom aluminum castings for Broilmaster grills. We also don't sell grease cup holders, grid lifters, hood lifters, shelves or shelf boards or brackets. |
Do Not Stock or Sell |
|
Carts, Post and Pedestals, and Inground Posts
|
We do not stock or sell any posts for rollaround carts, pedestal bases, or inground mountings. We do not sell any posts for Broilmaster grills. We do not stock or sell any pedestal bases, carts, wheels, or mounting hardware. Contact Broilmaster Customer Service for posts you need and any hardware or parts for rollaround carts, pedestal base mountings, or inground mountings.
|