| Parts |
Grill Body #1000 |
Price |
|
Burner Alternatives. Grill Body 1000 used burners with post controls, that is knobs down on the post below the cooking compartment. Most had one knob to turn the gas on. A few had two knobs. Please select the correct burner by the number of knobs used to turn the gas on. After that, you will need to select either the Stainless Steel Bow Tie Burner or the Cast Iron Bow Tie Burner depending on your preference. The next four entries describe the choices.
|
|
 The DPP1 stainless steel bow tie is discontinued by Broilmaster and no longer available. For 1000 series models, please use the WSB13 burner below.
Factory Equipment Stainless Steel Bowtie Burner with Single Venturi Tube that goes straight down the post. Single Control Knob on Post Below Grill Housing. Burner Dimensions: 17 inches wide by 9 inches deep.
|
|
|
 Cast Iron Bowtie Burner with Single Venturi Tube that goes straight down the post. Single Control Knob on Post Below Grill Housing. Burner Dimensions: 17 inches wide by 9 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. This cast iron bow tie replacement burner cannot be used in any Broilmaster models that originally had stainless steel burners. And cannot be used in models starting with D, P, S, or U.
|
$78.00
Each
|
|
 The stainless steel bow-tie burner for post controls, DPP2, has been discontinued by Broilmaster. We are sold out and cannot supply For a replacement burner, order the cast iron bow tie burner with straight venturi tubes in this parts list.
Stainless Steel Bow Tie Burner for Dual Control Model Grill Bodies with Two Straight Venturi Tubes that go straight down from the burner to the control valves in the post. Comes with burner, twin straight venturis, gasket and screws. Burner Dimensions: 17 inches wide by 9 inches deep.
|
|
|
 Cast Iron Bow Tie Burner for Broilmaster Dual Control grill with Two Straight Venturi tubes that go straight down from the burner to the control valves in the post. Comes with burner, twin straight venturis, gasket and screws. Burner Dimensions: 17 inches wide by 9 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. This cast iron bow tie replacement burner cannot be used in any Broilmaster models that originally had stainless steel burners. And cannot be used in models starting with D, P, S, or U.
|
$79.00
Each
|
|
 Closeout Pricing. While Quantities Last. We sold this replacement, heavy duty, galvanized steel, radiation shield, for over 20 years. This aftermarket, replacement radiation shield was made to fit the following Broilmaster grill bodies: 3, 4, 5, and 1000. We recently found a limited quantity in the corner of our warehouse. The shield measures 16 3/4 by 8 inches. The center hole is 5 1/2 inches in diameter. There is a lip around the center hole to stabilize the shield sitting on the bottom of the grill opening. The notch on the back of shield was to let the tube from the custom Broilmaster smoker box draw air from the outside. Most folks don't have those smoker boxes anymore.
|
$21.95
Each
|
|
Cook Grids Alternatives. You have two choices for cook grids for the 1000 grill body: the more expensive factory set of 2 porcelain coated, cast iron grids or the alternative set of 2 porcelain coated, cast iron cook grids. Even though there is a substantial price difference, we feel the quality is comparable. Both are made to fit the 1000 cooking compartment. The factory set has a more flat surface than the alternative set with a rounded top surface. Your two choices are described below.
|
Cast Iron
Cook Grids |
Broilmaster has discontinued the cook grid set for this grill. The factory equipment was two cast iron cook grids with a black matte finish. We are sold out and can find no more. Please refer to the next entry for the one piece chrome wire replacement. |
Do Not Stock or Sell |
|
 Made in the USA. Broilmaster has discontinued the cast iron cook grid set. We do have an exact fit, one piece chrome plated wire cook grid for this grill. Measurement is 13 3/4 by 20 inches. (CG6).
|
$24.95
Each
|
|
 This aftermarket, one piece porcelain coated, rod cook grid was made specifically for the Broilmaster Grill Body 1000. We recently found them in our warehouse and are offering them for sale at reduced pricing. They are little shopworn after so many years of storage but are structurally sound with a few chips in the porcelain coating.
|
$18.00
Each
|
|
 The original G1000 rock grate sat on the top of the burner. To prolong the life of the burner and help it burn better, Broilmaster has changed this rock grate and added legs. The four legs go to the bottom of the casting and the rock grate sits a few inches above the burner. We have sold it for years without problems. Dimensions of the new-design rock grate is 11 1/2 inches front to back, 18 1/4 inches wide, with 5 3/8 inch legs.
|
$26.95
Each
|
|
 While Supplies Last. These high quality ceramic briquettes are made in the U.S.A. and are the choice of many grill manufacturers. Ducane 'original' ceramic briquettes specially made for us by Ducane's original briquette manufacturer. We special offer them as our choice for replacement grill briquettes. Ceramic briquettes, each approximately 2 inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. By ordering here, you will receive a quantity of 70 individual ceramic briquettes.
|
$49.00
for 70 briquettes
|
|
Sorry, Broilmaster has discontinued this warming rack. We are out and no more are available.
This warm rack sat in the notches on the back of the 1000 body casting size.
|
|
|
 Rectangular Heat Indicator that Mounted in the front of the top casting with two mounting screws. Heat sensor fits through the small hole in top casting. (TG-2B)
|
$8.95
Each
|
|
While Supplies Last. This valve knob was used on post control models. Grills with dual control valves on the post and took two knobs. Grills with a single valve took one knob. Broilmaster has discontinued this knob and we substitute a replica universal knob that will work in its place. (k10)
|
$7.25
Each
|
| Warming Racks |
We have no warming racks for grill body 5. We don't believe that any are available. Sorry, can't help. |
Do Not Stock or Sell |
| Valves & Orifices |
Sorry, we do not sell any valves or orifices for Broilmaster grills. Also, for reasons of product liability and customer safety, we do not sell or offer any orifices or conversion kits to change grills from one gas to another. |
Do Not Stock or Sell |
| Lid & Cart Handles |
Sorry, we do not stock or sell any of the replacement plastic, wood, or metal handles for Broilmaster gas grills. |
Do Not Stock or Sell |
| Other Parts |
Sorry, we don't sell valves, igniters, cart parts, wheels, pedestal or cart base kits, no top or bottom aluminum castings for Broilmaster grills. We also don't sell grease cup holders, grid lifters, hood lifters, shelves or shelf boards or brackets. |
Do Not Stock or Sell |
|
|
|
Carts, Post and Pedestals, and Inground Posts
|
We do not stock or sell any posts for rollaround carts, pedestal bases, or inground mountings.
We do not sell any posts for Broilmaster grills.
We do not stock or sell any pedestal bases, carts, wheels, or mounting hardware.
Contact Broilmaster Customer Service for posts you need and any hardware or parts for rollaround carts, pedestal base mountings, or inground mountings.
|
