Lynx Grill Parts for Lynx Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.

Lynx Gas Grills
Gas Grill Parts from BBQParts.com

We stock and sell the parts listed below for Lynx gas grills

All the parts we stock and sell for Lynx grills are listed below.

Free Shipping For All Orders Over $99.00!

(Low $12.98 Shipping Charge for Orders Less than $99.00)

Lynx Model Look-Up:

Cast Iron Burners

Parts

Description

Price

Cast Iron Burner [CIDCSLX]

P/N 22701

in-stock

This is a cast iron burner used in many 27, 36, and 48 inch Lynx gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX) This burner replaces GE/MONOGRAM OEM part number WB28X10025.

$72.00
Each

Cast Iron Burners - 2 Pak

P/N 22701-2pak

in-stock

By ordering this two pack of 22701 burners, you will receive two 22701 cast iron burners. These are cast iron burners used in many 27, 36, and 48 inch Lynx gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX-2pak) This burner replaces GE/MONOGRAM OEM part number WB28X10025.

$144.00
for 2 Burners

Cast Iron Burners - 3 Pak

P/N 22701-3pak

in-stock

By ordering this three pack of 22701 burners, you will receive three 22701 cast iron burners. These are cast iron burners used in many 27, 36, and 48 inch Lynx gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX-3pak) This burner replaces GE/MONOGRAM OEM part number WB28X10025.

$216.00
for 3 Burners

Stainless Steel Cook Grids

Parts

Description

Price

Stainless Steel Rod Replacement Cook Grid [Replaces LYNX OEM P/N 30018 or 59630018]

P/N CG94SS

in-stock

Made in the USA. This high quality, stainless steel cook grid is made of 3/8 diameter stainless steel rod. Dimensions are 13.5 inches by 21 inches. Grills normally take more than one cook grid. Sometimes used in combination with the other cook grid on this page. This grid fits many 30 inch, 42 inch, and 54 inch models for Lynx models. Compare measurements with your cook grid. Order what you need. Replaces the OEM part number 30018. (59630018)

$142.00
Each

Stainless Steel Rod Replacement Cook Grid [Replaces LYNX OEM P/N 30019 or 59630019]

P/N CG95SS

in-stock

Made in the USA. This high quality, stainless steel cook grid is made of 3/8 diameter stainless steel rod. Dimensions are 12 inches by 21 inches. Grills normally take more than one cook grid. Sometimes used in combination with the other cook grid on this page. This grid fits many 42 inch and 54 inch Lynx models. Compare measurements with your cook grid. Order what you need. Replaces the OEM part number 30019. (59630019)

$128.00
Each

Heat Plates and Briquettes

Parts

Description

Price

Stainless Steel Heat Plate [Replaces OEM P/N 80006] [LYNXHP1]

P/N 92571

in-stock

This stainless steel heat plate measures 17 inches by 9 11/16 inches. Order the quantity you need. Our heat plate does not include briquette clips. Sorry, we do not stock or sell them. (LYNXHP1) This part replaces Lynx OEM part number 80006. This heat plate replaces GE/MONOGRAM OEM part number WB02X10698.

$59.00
Each

Stainless Steel Heat Plate

P/N LYNXHP2

Replaces OEM P/N 80644

in-stock

This stainless steel heat plate is made of 304 grade stainless steel. The heat plate measures 10 1/2 inches wide and 19 1/4 inches front to back. Fits different Lynx models - more than one may be required per model. Order the quantity you need. This heat plate takes 28 two inch square ceramic briquettes. The briquettes (P/N BBQLYX-USA) are NOT included. (80644, 90190)

$79.50
Each
Order the quantity you need.

Stainless Steel Heat Plate

P/N LYNXHP3

Replaces OEM P/N 80645

in-stock

This stainless steel heat plate is made of 304 grade stainless steel. The heat plate measures 12 1/2 inches wide and 19 1/4 inches front to back. Fits different Lynx models - more than one may be required per model. Order the quantity you need. This heat plate holds 35 two inch square ceramic briquettes. Briquettes (P/N BBQLYX-USA) are NOT included. You will need to calculate the number of boxes of briquettes you need to order. There are not available in 35 box counts, sorry. (80645)

$89.50
Each
Order the quantity you need.

USA-MADE Square Ceramic Briquettes. 28 Briquettes per box.

P/N BBQLYX-USA

in-stock

These high-quality, Made in the USA, briquettes are manufactured for us by the leading manufacturer/supplier to a number of high quality, American made brands of gas grills. They fit and work for heat plates in Lynx, Dynasty, and Alfresco gas grills. Can be used in other brands as well. They are a light brown, earth tone color (same as ones used in high end, USA grills) and the same size as the white replacement briquettes sold on the internet. The briquettes are well packaged, in individual boxes of 28 briquettes. They are NOT shipped in bags. The briquettes measure 2 inches square and are 3/4 inch tall. The four sides meet at a flat top - like a cut off pyramid. On the bottom, there is a round recess, approximately 1 inch in diameter, to capture and transfer heat better. We are able to offer these at very reasonable pricing because of our quantity buying. By ordering one box, you will receive one box of 28 briquettes. Order the box quantity you need. The number of briquettes you need depends on the size of the heat plate, and the number of heat plates in your grill. We suggest you count before ordering to get enough. (28 briquettes per box). Highly recommended. (not 41648)

$34.95
Box of 28 briquettes

Electrodes and Igniter Parts

Parts

Description

Price

Lynx Collector Box with Electrode and 15 inch Wire

P/N IG47B

in-stock

This aftermarket Lynx collector box with electrode and 15 inch wire is a substitute for the Lynx original equipment part numbers 12014 (electrode with wire) and 10077 (collector box). The connecting wire of this stainless steel spark collector box terminates with a round female connector. Order the quantity you need. (IG47B)

$25.95
Each

Aftermarket Hot Surface Main Burner Electrode [L3BCL]

P/N 33051

in-stock

Aftermarket Hot Surface Main Burner Electrode used in some Lynx models. 4 1/4 inches long. Replaces LYNX OME Part# 33051. (L3BCL) Fits: LYNX Models L27-2-2010, L27F-2-2010, L27FR-2-2010, L27PSFR-2-2010, L27PSR-2-2010, L27R-2-2010, L30PSFR-1-2010, L30PSR-1-2010, L30R-1-2010, L36PSFR-1-2010, L36PSR-1-2010, L36R-1-2010, L42PSFR-1-2010, L42PSR-1-2010, L42R-1-2010, L54PSFR-1-2010, L54PSR-1-2010, LPB

$59.99
Each

Aftermarket Single Electrode with 25 inch Wire. [L2CJ6]

P/N 31221

in-stock

Single Electrode with 25 inch Wire. Used in some Lynx models. (L2CJ6) Fits: LYNX Models: 27-2007, L27-2006, L27-2005, L30-2005, L36R-2005, L42R-2005, L54PSFR-2005, L30-2002, L42-2002, L30-2003, L30-2004, L42-2003, L42-2004, L54-2002, L54-2003, L54-2004, L5430R2B-2005, L5430FR2B-2005, L54PSR-2005, L42FR-2005, L42PSFR-2005, L42PSR-2005, L30F-2005, L30APSR-2005, L30APSFR-2005, L30R-2002, L30FR-2005, L30SPR-2005, L30PSFR-2005, L36FR-2005, L27R-2005, L27F-2005, L27FR-2005, L30R-2003, L30R-2004, L30FR-2002, L30FR-2003, L30FR-2004, L30F-2002, L30F-2003, L30F-2004, L30PSR-2004, L30PSFR-2004, L42R-2002, L42R-2003, L42R-2004, L42FR-2002, L42FR-2003, L42FR-2004, L42PSR-2004, L42PSFR-2004, L54SBR-2002, L54SBR-2003, L54SBR-2004, L54SBFR-2002, L54SBFR-2003, L54SBFR-2004, L54R-2004, L54FR-2004, L5430-2002, L5430-2003, L5430-2004, L27-1- 2006, L27R-1-2006, L27F-1-2006, L27FR-1-2006, L27-1-2007, L27R-1-2007, L27F-1-2007, L27FR-1-2007, L27-2008, L27-2-2008, L27F-2- 2008, L27FR-2-2008, L27R-2-2008, L27F-1-2008, L27-1-2008, L27R-1-2008, L27FR-1-2008

$14.99
Each

Lynx Igniter Micro Switch [Replaces LYNX Part 32845]

P/N L58PR

in-stock

Lynx igniter micro switch. Replaces LYNX OEM Part 32845. Spring steel lever to actuate push button and two 1/8 inch male flat spade terminals for the igniter wire connections. 3/4 by 3/8 inches. Fits Lynx models: L27, L30, L36, L42, L54. Sedona Models: L400, L500, L600, L700.

$9.89
Each

Rotary Igniter With Knob, Two Outlets [UP-6B]

P/N 03220

in-stock

This TWO outlet rotary igniter is shipped with knob included. (UP-6B).

$12.89
Each

Rotary Igniter With Knob, Three Outlets [UP-8B]

P/N 03230

in-stock

This three outlet, rotary igniter is shipped with the knob included. (UP-8B).

$13.79
Each

Rotary Igniter Knob

P/N GGK9

in-stock

This is the replacement Knob only that is used on rotary igniters, igniters that are manually turned by hand to produce a spark. The Knob is 1 and 3/4 inches in diameter. Directional arrows are molded in the plastic facing of the Knob. (20182601, 20173101)

$3.95
Each

20 inch Igniter Adapter Wire

P/N 03750

in-stock

This 20 inch long igniter adapter wire has a different connector style on each end. One end has a male round connector and the other end has a female flat spade connector. Order the quantity you need.

$2.50
Each

Universal Control Knob

Parts

Description

Price

Universal Gas Grill Control Knob.

P/N 02342

in-stock

Universal Knob. Selectable D Position, Socket Dia. (6mm Or 8mm), And Shaft Length (Flush, 0.25 Inch, Or 1.625�. Shatfs Can Also Be Trimmed To Desired Length). Includes Six Inserts (Shafts) And Set Screw. Fits Any Grill With Inside Bezel Dia. Greater Than 2.1875.

$13.89
Each