Parts for Weber Genesis 3000 Gas Grills
Gas Grill Parts from Grill Parts Distributors.

Weber Genesis 3000 Progane BarbecueWEBER GENESIS GRILLS.  Weber designed one of the most popular and innovative gas grills over 10 years ago - the Weber Genesis with a three burner system, short and long flavorizer bars, and pull-out drip pan.  We stock and sell cook grids, flavor bars, burner tubes, crossover tubes, igniter kits, warming racks and most other parts for the Weber Genesis series.

One, Low Shipping Charge of $6.95 for all Weber Orders!

 
Parts Popular Parts for Genesis 3000 Price
The tube burners and crossover tube we offer below are exact replacements for the original burners and crossover tube in the Weber Gensis grill. They are not "retrofits" or changed from original equipment.
Genesis Burner Kit
P/N WTB-1
in-stock
This Weber burner kit includes the three burners, the crossover tube, and mounting hardware for the early Weber Genesis three burner models. The burners are made of high quality, 304 stainless steel, and come with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. The kit includes the front and rear burners (40822206), the center burner tube (40822207), and the crossover tube (40822208), and the hardware pack with two metal screws, two metal washers, and two metal nuts. These are the used to secure the front and rear burners to the grill. The center burner is held in place with the crossover tube that threads through its notch. (WTB-1). $44.99
One Kit WTB-1
Quantity of Sets:
Burner
P/N 40822206
in-stock
Stainless steel front and rear tube burner for Genesis. The front and rear burners are of the same design. For complete set, need 2 front and rear burners and one center burner. This burner comes with a steel mesh spider guard already installed at the air vent opening. Sold individually. $14.75
Each
Quantity:
Burner
P/N 40822207
in-stock
Stainless steel center tube burner for Genesis. For complete set, need one center tube burner and two front and rear burners. This burner comes with a steel mesh spider guard already installed at the air vent opening. Sold individually. $14.75
Each
Quantity:
Crossover
P/N 40822208
in-stock
Stainless steel crossover tube on the left side (as you face the grill) of the Genesis Cooking Compartment that carries the flame of ignition to the center and back burners. (K-WTB1)
$7.75
Each
Quantity:
Spider Guard
P/N 4086977
in-stock
Weber Genuine Factory Part. Spider Guard for Individual Burners. We sell these as individual spider guards. Order one per burner. Weber formerly sold them as a kit with sets of spider guards by part number 4089700. Now must be ordered individually. $1.50
Each
Quantity:
Igniter Kit
P/N 7509
in-stock
Weber Genuine Factory Part. Weber Igniter Kit for models: Spirit, Genesis (models prior to 2002 model year). Contains collector box, wire and electrode in one assembly and separate push button. The push button is threaded for screwing into position. $12.95
Each
Quantity:
Cook Grid Set
P/N 7525
in-stock
Weber Genuine Factory Part. Porcelain enameled factory cook grid set for Genesis. Set of 2. Made for Genesis 1000, 1500, 2000, 3000, 3500, also Genesis 1, 2, 3, and Silver B & C and Gold B & C. Individual cook grid measures 11 3/4 inches by 17 1/4 to combine for overall size of 23 5/8 by 17 1/4. To upgrade to stainless steel cook grid set, use 9869. (Formerly 9860) $39.99
Set of 2
Quantity of Sets:
Flavorizer Bars
P/N 9813
in-stock
Weber Genuine Factory Part. Porcelain enameled Flavor Bar Set. Complete set of 8 short (16 inches) and 5 long (23 3/8 inches) flavor bars for Genesis 1000, 1500, 2000, 3000, 3500, 4000, 5000, 5500, also Genesis 1, 2, 3, 4, 5. Most of the Genesis Series came with this porcelain enameled set. The long flavor bars are 23 3/8 inches long and the short flavor bars are 16 inches long. To upgrade to stainless steel flavor bar set, use 9814. $59.00
Set of 13
Quantity of Sets:
New Stainless Upgrades. Weber has introduced a stainless steel cook grid set and stainless steel flavor bar set to fit this model. You can order these directly below instead of 7525 cook grids and 9813 flavor bars.
Cook Grids
P/N 7527
in-stock
Weber Genuine Factory Part. Stainless Steel Factory Cook Grid set for Genesis. Set of 2. Made to fit Genesis 1000, 1500, 2000, 3000, 3500, also Genesis 1, 2, 3, and Silver B & C and Gold B & C. Most Genesis grills originally came with porcelain enameled set. This replacement set of stainless steel grids is offered as an exact-fit replacement for porcelain set 9860. Individual cook grid measures 11 3/4 inches by 17 1/4 inches to combine for overall size of 23 5/8 by 17 1/4. (Formerly 9869) $59.99
Set of 2
Quantity of Sets:
Flavorizer Bars
P/N 7538
in-stock
Weber Genuine Factory Part. Stainless Steel Flavor Bar Set. Complete set of stainless steel flavor bars: 8 short (16 inches) and 5 long (23 3/8 inches) for Genesis 1000, 1500, 2000, 3000, 3500, 4000, 5000, 5500, also Genesis 1, 2, 3, 4, 5. Most Genesis grills originally came with porcelain enameled flavor bars. The long flavor bars are 23 3/8 inches long and the short flavor bars are 16 inches long. This 9814 set upgrades the flavor bars to stainless steel. (Formerly 9814) $79.99
Set of 13
Quantity of Sets:
Warming Rack
P/N 4072122
in-stock
Flat Chrome Plated Warm Rack. Sits across the back of the cooking surface in notches in the grill body. (7513) $11.95
Each
Quantity:
Warm-up Basket
P/N 9875
in-stock
This Weber warm up basket is the cradle style warming basket that fits into the notches of the lid of the following Weber models: Genesis 1000, 2000, 3000, 4000, 5000, 5500 and the Weber Spirit 700. It measures 24 1/4 inches from tip to tip of the hanging rod. It is not the flat basket that sits across the cooking compartment on the bottom casting. (7514, 4872180)(APWEBCR) $10.99
Each
Quantity:
Set of 2 Rails and 4 Mounting Screws
P/N 40822205
in-stock
Weber Genuine Factory Part.Weber Genuine Factory Part. By ordering this part number, you will get set of two rails plus the needed four screws to mount the rails. The rails and screws are all genuine Weber parts. (97783) $8.79
Per Set
( 2 Rails and 4 Mounting Screws )
Quantity of Sets:
Tray
P/N 40968012
in-stock
Weber Genuine Factory Part. Pull out bottom tray under burner section. 13 13/16 by 19 5/8 inches. Does not come with catch pan holder (#85915) or catch pan (#40822203). $27.99
Each
Quantity:
Pan Holder
P/N 85915
in-stock
Weber Genuine Factory Part. Wire catch pan holder attached to pull-out bottom tray under burners of the cooking section. Does not come with catch pan (#40822203). (7515) $9.99
Each
Quantity:
Drip Pans
P/N 3300
in-stock
Weber Genuine Factory Part. Small Drip Pans. These drip pans are used in the Weber Genesis, Silver, and Spirit Series Grills to line the enamel catch pan in the pull out bottom tray. Each pan is 6 inches by 8 1/2 inches. 10 per package. Does not fit the Summit Series grills. (3300, 6415) $5.49
Pack of 10
Quantity of Sets:
Catch Pan
P/N 40822203
in-stock
Weber Genuine Factory Part. Weber now subs an aluminum drip pan for the black porcelain pan.
Catch pan that sits in the wire catch pan holder. Does not come with wire catch pan holder (85915). (85880, 93305)
$9.99
Each
Quantity:
Knob
P/N 40875590
Sorry, we are temporarily out of stock of this knob til May 10. Please check back.
Weber is now shipping the knob used on their new Silver Series Genesis grills (part number 78960) as a replacement for the original grey control knob on earlier Genesis and Spirit models. There is no change in the shaft length and how it fits on the valve stem - it works fine. But it is a lighter color. If you want the three knobs on your grill to match, please order three control knobs.
6.79
Wheel - 8 inch Diameter with Hub Cap
P/N 4082850
New P/N 99252
in-stock
Weber Genuine Factory Part. Limited Quantities Available. Weber cart wheel. Weber now subs old wheel, 4082850, to a newly designed cart wheel for Genesis, Spirit, and Silver Series grills. The new wheel has the same dimensions as old part number 4082850, takes the same axle rod, takes the same push on black hub cap, and is still 8 inches in diameter. The difference is it is more modern, contemporary, or fancy in appearance. If you have the old wheel and want the wheels to match, order quantity two (2). Each wheel is shipped with one Weber hub cap (P/N 87101) at no additional charge. Sorry, we do not have extra Weber hub caps to sell separately. $10.89
Each
Quantity:
Side Work Table
P/N 10300

in-stock
Weber Genuine Factory Part. The original side work table made of redwood slates and used in the older Genesis series grills is discontinued. Weber now subs to their kit number 3627. The 3627 kit is an exact fit shelf that replaces the original shelf - the new shelf has six gray colored Durawood slats and is assembled wi metal slats at each end, Durawood is a synthetic plastic composite. This kit does not substitute for the lift up work table on older Genesis models. We do not have that available. (10301, 10300, 87865, 3627) $24.95
Each
Quantity:
Fold Up or Swing Up Work Table
Fold Up or Swing Up Work Table. Sorry, we don't stock the fold up or swing up side work table for any of the Weber Gas Grills.
Sorry, Do Not Stock or Sell.
Handle
P/N 86063
in-stock
This front, brown wood handle (part number 86063) that was used on older Weber Genesis series models has been discontinued by Weber. We now have an replacement handle made of grey, dura-plastic that is supplied to us by Weber. It is different color, different material, but the same size and it fits. Approximately 24 15/16 inches across. It does not come with hardware (no nuts or bolts) and, unfortunately, we do not have any to supply. (85851Y, 86064Y, 87963Y, 4079650Y, 7546?, 3608Y, R63Y)(90427/9/09) $14.95
Each
Quantity:
Thermometer
P/N 62538
in-stock
Weber Genuine Factory Part. Dual Purpose Thermometer. Can be used in the lid bracket to measure internal grill temperature or can be used as a meat thermometer. Does not come with the holding bracket. This is a replacement thermometer (with probe) only. (9815) $9.95
Each
Quantity:
Manifold Assemblies, Valves, Orifices
Sorry, we do not stock or sell any manifold assemblies, valves, orifices, regulators, hose and regulator assemblies or conversion kits for any Weber gas grill.
Manifold Assemblies, Valves, Orifices
Other Weber Parts
All the parts we stock and sell for Weber grills are listed on our website. We do not stock or sell any other Weber parts. If you don't see the part on our website, please try Weber Customer Service.
Other Weber Parts

 

 

Thermos Grill Parts for Thermos Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.
Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.

Answers and Click Throughs to Frequently Asked Questions

What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  We reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com. Please use our online brand shopping carts for efficient order processing.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  We ship orders from our in-stock inventory, usually within two business days of receipt of order via United Parcel Service (UPS) ground service from St. Petersburg, Florida. We have one low shipping charge per order - only $6.95 per order.   Sorry, we do not offer any expedited shipping service.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store and do not offer customer pickup at our warehouse.
Shipment Inquiry
& Report Form
  Customer
Inquiry Form
  Shipping Areas
& Charges
  Returns
Policy
  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 

Back to the Home Page


Copyright 1997- 2014, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.