| Grill Body #4 | |||||
| Part # | Description | Price | |||
| Burner Alternatives. There are burner choices for Grill Body #4 depending if the burner controls are on the post of the grill or are on the upfront control panel or shelf. POST control burners have two venturi tubes going straight down the post of the grill. UPFRONT control burners have two venturi tubes that curve to the front of the grill. After you determine POST or UPFRONT style, you will need to select either the Stainless Steel Bow Tie Burner or the Cast Iron Bow Tie Burner depending on your own preference. The next four entries describe the choices. | |||||
| DPP-3 in-stock |
 Stainless Steel Bow Tie Burner for Dual Control
Grill Body 4 with upfront controls. Two Curved Venturi Tubes go from
Burner and curve upfront to control valves on the front control panel. Comes with burner, twin curved venturis, gasket and screws.
Burner Dimensions: 17 inches wide by 9 inches deep.Note: Broilmaster now subs to DPP102 for the DPP3 burner. We ship the DPP102 burner and find it identical to the DPP3 burner. The DPP102 burner fits models P4, D4, U4. U5. It is does not fit models P5, D5, S5, S2 or Aspen series - try Broilmaster for that burner. |
|
|||
| WDSB-DV8 in-stock |
 Cast Iron Bow Tie Burner for Dual Control Model Grill Body 4 with upfront controls.
Two Curved Venturi Tubes go from Burner and Curve Upfront to Control Valves on
front control panel. Comes with burner, twin curved venturis, gasket and
screws. Burner Dimensions: 17 inches wide by 9 inches deep. |
|
|||
| DPP-2 |
 The
stainless steel bow-tie burner for post controls, DPP2, has been discontinued by
Broilmaster. We are sold out and cannot supply For a replacement burner, order
the cast iron bow tie burner with straight venturi tubes in this parts list. Stainless Steel Bow Tie Burner for Dual Control Model Grill Body 4 with Two Straight Venturi Tubes that go straight down
from the burner to the control valves in the post. Comes with burner, twin
straight venturis, gasket and screws. Burner Dimensions: 17 inches wide by 9
inches deep. |
|
|||
| WDSB-DV7 in-stock |
 Cast Iron Bow Tie Burner for Dual Control
Model Grill Body 4 with Two Straight Venturi tubes that go straight down
from the burner to the control valves in the post. Comes with burner,
twin straight venturis, gasket and screws. Burner Dimensions: 17 inches wide by
9 inches deep. |
|
|||
| RSGSTAINLESS in-stock |
 This radiation shield is newly offered and is made of stainless steel. It is
placed in the burner compartment of the grill between the burner and the bottom
casting. Made of Stainless Steel. |
|
|||
| Cook Grid Alternatives. You have two choices for cook grid sets for the Grill Body 4: the more expensive factory set of 3 porcelain coated, cast iron cook grids or the alternative set of 2 porcelain coated wire cook grids made to fit the Grill Body 4. Your two choices are described below. | |||||
| DPP-12 in-stock |
Factory equipment set of 3 Cast Iron Cook Grids with a Black Matte Finish. The set of three piece cook grid set cover area totaling 3. Approximately 15 1/4 inches by 22. |
|
|||
| CG21P in-stock |
Two piece set of porcelain coated wire cook grids. Approximate cooking area is 15 1/4 by 22 - made to fit the Broilmaster Grill Body #4. |
|
|||
| BG14 in-stock |
Rock grate for casting size 4. Size is 12 3/8 by 20 1/4 inches. |
|
|||
| Lava Rock 7 lb. Bag in-stock |
 We offer an 7 lb. bag of high quality lava rock to
use on top of the rock grate listed above. One bag is enough to cover for one
cooking compartment. The 7 lb. bag covers 400 square inches of rock grate
surface. Remember, we have just one shipping charge per order so you can add a
bag of lava rock for no additional shipping charge. |
|
|||
|
60
Ceramic |
Our ceramic briquettes, popular for over fifteen years, are approximately two inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. Our bag of 60 briquettes cover the rock grate of any Broilmaster grill. We have just one shipping charge per order so you can add a bag for no additional shipping charge. |
|
|||
| Warming Rack Alternatives. In different model years, Grill Body 4 used two different style warming racks. One is no longer available. Read the description below to make the correct choice. | |||||
| 878289R | Sorry, this warming rack is temporarily out of
stock until October 2. Please check back. The body casting size 4 has taken two different warm racks. Listed here is the "retract-a-rack" style - it is above the cooking grids and moves up and down as the lid is opened and closed. The other warm rack that went across the back of the grill and set in the notches of the grill casting is no longer available. |
|
|||
| Heat Indicator in-stock |
 Rectangular Heat Indicator Mounted in the
Indicator front of the top casting. |
|
|||
| 662327R subs |
This valve knob was used on post control models of the G#4 body casting size. G#4 grills had dual control valves on the post and took two knobs. Broilmaster has discontinued this knob and we substitute a replica universal knob that will work in its place. Price is 3.95. |
|
|||
| Valves & Orifices |
Sorry, we do not sell any valves or orifices for Broilmaster grills. Also, for reasons of product liability and customer safety, we do not sell or offer any orifices or conversion kits to change grills from one gas to another. |
Do Not Stock or Sell |
|||
| Lid & Cart Handles |
Sorry, we do not stock or sell any of the replacement plastic, wood, or metal handles for Broilmaster gas grills. |
Do Not Stock or Sell |
|||
| Other Parts |
Sorry, we don't sell valves, igniters, cart parts, wheels, pedestal or cart base kits, no top or bottom aluminum castings for Broilmaster grills. We also don't sell grease cup holders, grid lifters, hood lifters, shelves or shelf boards or brackets. | ||||
